FS
Documentation

Backup3G/Backup3G 5.1 Release Notes

From Documentation

(Difference between revisions)
Jump to: navigation, search
Revision as of 01:28, 17 August 2007
Moff (Talk | contribs)
(Notes facility)
← Previous diff
Revision as of 06:54, 17 August 2007
Moff (Talk | contribs)
(New Features in this Release)
Next diff →
Line 141: Line 141:
<br> <br>
-=== Arbitrary commands can easily be run as part of a backup job ===+==== Arbitrary commands can easily be run as part of a backup job ====
The scan method now defaults to multi-volume media scan, where the scan proceeds from the last tape in the set to the first. The scan method now defaults to multi-volume media scan, where the scan proceeds from the last tape in the set to the first.
Line 148: Line 148:
<br> <br>
-=== Media scan method removed ===+==== Media scan method removed ====
The scan method now defaults to multi-volume media scan, where the scan proceeds from the last tape in the set to the first. The scan method now defaults to multi-volume media scan, where the scan proceeds from the last tape in the set to the first.
Line 155: Line 155:
<br> <br>
-=== Media copy now configured as part of the backup job ===+==== Media copy now configured as part of the backup job ====
There are now three ways to produce a duplicate set of a backup media volume set. In all cases the ''target drive'' must be of the same media type as the ''source drive''. There are now three ways to produce a duplicate set of a backup media volume set. In all cases the ''target drive'' must be of the same media type as the ''source drive''.
Line 163: Line 163:
<br> <br>
-=== Restore steps may now be pre-configured ===+==== Restore steps may now be pre-configured ====
You may now initiate a restore via the command line. This may be used by COStask or COSduy to preconfigure specific application restores. The command is: You may now initiate a restore via the command line. This may be used by COStask or COSduy to preconfigure specific application restores. The command is:
FSrestore -i|-b [-D <to directory>] [-h <to hostname>] [-v <drive>] [-M <method>] [-f <files>] [-d <directories>] [<media number>] FSrestore -i|-b [-D <to directory>] [-h <to hostname>] [-v <drive>] [-M <method>] [-f <files>] [-d <directories>] [<media number>]

Revision as of 06:54, 17 August 2007

Contents

Overview and Features

Backup3G

Backup3G 5.1 ...


New features in backup3G

Simpler Job Configuration

Improved Auditing


Documentation


Installation Requirements

Software prerequisites

To install and run backup3G 5.1 on a host, you must have:


Disk space required

Software Approximately 1.5 MB in the backup3G home directory.
Temporary Files While installing backup3G: less than 1.5 MB, to hold a copy of the software distribution.
While backup3G is running: less than 5 MB in /tmp.
Audit Trails For the backup3G audit trail, about 10 - 50 MB in the system spool area. The actual amount will depend on the activity on your system (e.g. how many backups are run), and how often you archive and delete the log files.
For the operations audit trail, about 10 - 50 MB in the system spool area. The actual amount will depend on the activity on your system.
For the configuration audit trail, about 10 - 50 MB in the system spool area. The actual amount will depend on the configuration activity on your system.
Backup and Restore Logs For the backup3g backup and restore logs, up to 200 MB for a small backup environments, or up to 1 GB for medium to enterprise backup environments in the system spool area.


Running Remote Backups on Windows

The current backup3G release supports running remote backups and restores on Windows hosts which have the EWC (Enterprise Windows Client) 3.1.1 installed. This product may be purchased separately.


Related Software

The release of backup3G 5.1 coincides with the release of stacker3G 5.1 (module), VTL3G (module), DA_Oracle 5.1 (module) and duty3G 5.1 (application).


Upgrading COSbackup 3.2.1 - 3.2.6


Technical Notes: Using backup3G 5.1

This section contains some technical notes, tips, and troubleshooting information to help you when installing or upgrading to backup3G 5.1.


Temporary or trial licensing

Backup3G may be issued with a temporary license for use in trials or demonstrations. Temporary licenses have an in-built expiry date. You must obtain a permanent license or a new temporary license from your COSmanager distributor to keep using backup3G after the expiry date.

Note
Note
Backup3G won’t install if the license key is due to expire within the next 7 days. In this case you will need to obtain a new license key from your COSmanager distributor.


COSmanager framework version required for backup3G 5.1

Backup3G 5.1 requires COSmanager 4.2.5 or newer.


Schedules and Schedtime

Backup3G 5.1 uses the newer, more generalised scheduling provided in COSmanager 4.2 releases. These include the datelist and schedule tables, which supersede the schedtime table (as used in COSbackup 3.2 releases). The schedtime table is now deprecated. It is important to note that the schedtime and schedule tables are maintained separately, and so changes to one table will not be reflected in the other. You should only maintain the schedule and datelist tables. You can do this via:


Audit Trails

When backup3G is installed, three new audit trails are created: Backup3G, backup_cfg and backup_ops. By default, these are created in the system spool area (usually /usr/spool or /var/spool). The Backup3G audit trail is the primary audit trail, recording all user actions, such as:

Depending on the volume of backups run, these directories may become large, so it is important that audit trail cycling be configured correctly for your site to prevent these files from growing unbounded. By default the audit trails are cycled:

Backup3G monthly, retaining for one year
backup_cfg monthly, retaining for six months
backup_ops monthly, retaining for six months.


New Features in this Release

Generalised calendaring for automatic backups

Backup3G V5.1 uses the new schedule and datelist tables which provide more features than the old schedtime table:

Note
Note
As with schedtime, scheduling of automatic backup jobs is still implemented via CRON.


Arbitrary commands can easily be run as part of a backup job

The scan method now defaults to multi-volume media scan, where the scan proceeds from the last tape in the set to the first.

To manually scan a single volume from the command line, you can still use the command:

FSdrive <drivename> scan


Media scan method removed

The scan method now defaults to multi-volume media scan, where the scan proceeds from the last tape in the set to the first.

To manually scan a single volume from the command line, you can still use the command:

FSdrive <drivename> scan


Media copy now configured as part of the backup job

There are now three ways to produce a duplicate set of a backup media volume set. In all cases the target drive must be of the same media type as the source drive.

  1. From the At-end command as defined for a backup job:
    FScopy [-u] [-U] [-T <minutes>] [-r <retention>|-r <days>] <target drive>
    This will copy the media set used for the current backup to a new media set in the target drive. The expiry date of the duplicate set is set to the same date as that of the backup job. This can be overridden by specifying “-r <retention>” or “-r <days>”.

    If the target drive is likely to be busy when needed for creating a duplicate media set, a timeout parameter may be added to the above command, “-T <minutes>”. If this parameter is omitted and the target drive is busy, the media copy will fail.

  2. Via COSbackup interface, from the COSbackup button bar:
    Media > select media set > Maintain > Copy

    You will be prompted for the run mode, the source drive and the target drive. The retention defaults to that of the selected media set, but may be overridden.

    When using manually loaded drives, unless the output media volume is preloaded in the target drive, a “Change media” will appear on the backup job monitor. To preload a scratch media volume, from the COSbackup button bar:
    Drive > select target drive > Operations > Load scratch

  3. From the command line, as would be used by COStask or COSduty, or a 3rd party batch processing product:
    FScopy -b [-u] [-U] [-T <minutes>] [-r <retention>|-r <days>] -s <media number> <source drive> <target drive>
    The retention period must be defined in the retention table. If it is not, the retention of the duplicate set will be set to “forever”.


Restore steps may now be pre-configured

You may now initiate a restore via the command line. This may be used by COStask or COSduy to preconfigure specific application restores. The command is:

FSrestore -i|-b [-D <to directory>] [-h <to hostname>] [-v <drive>] [-M <method>] [-f <files>] [-d <directories>] [<media number>]

If any parameters are missing a prompt will be displayed requesting the missing values.


Notes facility

You can now attach a HTML or text file of documentation to a backup job. This file can be viewed by the user from the backup console at any time.

Note
Note
There is no facility provided to create notes files—you can simply use your favourite text editor (vi, emacs etc.). Notes files should be created in the backup_5.1/local/notes directory.


Warnings

  1. Scan and rewind steps must be removed.


Known Problems in this Release


Hardware and OS Dependencies

AIX 4:

TX

Appears:

Suggested actions:


Linux:

X

Appears:

Suggested actions:


Solaris:

X

Appears: “

Suggested actions:


Copyright © 1990-2007 Functional Software. All rights reserved.