FS
Documentation

Backup3G/DA-Oracle/User Guide/Defining Oracle Backups

From Documentation

(Difference between revisions)
Jump to: navigation, search
Revision as of 06:53, 12 April 2006
Moff (Talk | contribs)

← Previous diff
Revision as of 06:58, 12 April 2006
Moff (Talk | contribs)
(How to Define a Backup Item)
Next diff →
Line 220: Line 220:
#Select COSbackup configuration > Maintain backup jobs. #Select COSbackup configuration > Maintain backup jobs.
#Select Items > Maintain to display the list of existing backup items, then select Maintain > Add. #Select Items > Maintain to display the list of existing backup items, then select Maintain > Add.
- +#;Item:Defaults to one more than the current highest item number. You can change it to any unused item number, but it is recommended that you accept the default.
-;Item:Defaults to one more than the current highest item number. You can change it to any unused item number, but it is recommended that you accept the default.+#;Object:Enter the SID of the instance to be backed up. Make sure that it is correct, as COSbackup doesn’t check that it exists at this point.
-;Object:Enter the SID of the instance to be backed up. Make sure that it is correct, as COSbackup doesn’t check that it exists at this point.+#;Host:Select the host on which the database is stored. If you want to back up the same database on multiple hosts, you must define a separate backup item for each.
-;Host:Select the host on which the database is stored. If you want to back up the same database on multiple hosts, you must define a separate backup item for each.+#;Method:Press Choose to list the backup methods.
-;Method:Press Choose to list the backup methods. +#;Index:Select ‘yes’ if you chose the ‘Oracle archive’ method. An onlineindex makes it easier to select particular archived redo logs to be restored.
-;Index:Select ‘yes’ if you chose the ‘Oracle archive’ method. An onlineindex makes it easier to select particular archived redo logs to be restored.+#;Options:Enter any optional flags and arguments to be passed to the backup command at run time. For example, enter -u username to specify another Oracle version if more than one copy of Oracle is installed on this host.
-;Options:Enter any optional flags and arguments to be passed to the backup command at run time. For example, enter -u username to specify another Oracle version if more than one copy of Oracle is installed on this host.+#;:You can see what other options this backup method supports by checking the man page for the corresponding backup driver script. Table 2 shows what driver script is run by each Oracle backup method.
-;:You can see what other options this backup method supports by checking the man page for the corresponding backup driver script. Table 2 shows what driver script is run by each Oracle backup method.+#;:<strong>Note -</strong> Use double quotes around file patterns to ensure that they are parsed correctly.
-;:<strong>Note -</strong> Use double quotes around file patterns to ensure that they are parsed correctly.+#;Comment:Enter a descriptive comment.
-;Comment:Enter a descriptive comment.+#;On error:Should the backup job continue if this step fails?
-;On error:Should the backup job continue if this step fails? +
#Select ‘continue’ if the job should continue after an error in this step. #Select ‘continue’ if the job should continue after an error in this step.
#Select ‘abort’ if the job should not continue. #Select ‘abort’ if the job should not continue.
Press Accept to save this item. Press Accept to save this item.

Revision as of 06:58, 12 April 2006

Oracle backups are configured the same as other backup jobs:


The main differences are:


Note: DA-Oracle does not support the Oracle Parallel Server option.

This section describes the ways you can back up Oracle databases, the Oracle-specific backup methods, and how to define backup items. Defining, scheduling, and monitoring backup jobs is described in the COSbackup User Guide.


Contents

Types of Oracle Backup

This topic describes the different methods for backing up Oracle databases.

Oracle Backup uses Oracle facilities other than RMAN to start up and shut down databases, and to find the names of objects to be backed up. Once the file names have been obtained, they are backed up the same as any other files using standard COSbackup facilities.

What happens if a step fails

If any step in the backup job returns a non-zero exit status, the backup job terminates. In this event DA-Oracle does not try to change the database mode or attempt any other recovery action.

You should diagnose the problem to see whether it occurred in an Oracle operation or a backup command, then if possible fix the problem and resubmit the backup job.

‘Exit status 2’ usually indicates a usage error in the backup command, such as an unrecognized option or an incorrect number of arguments. Other exit statuses are dependent on the backup method—check the manual page for the command that reported the error.

Any previous steps that wrote to the tape and completed successfully may be restored from, but depending on the type of backup may not be worth recovering.

The DBA should examine the reason for failure and the type of object in the successful backup steps to see whether they can be usefully recovered.

Two versions of Oracle installed on a host

The default Oracle version for a host is determined from the Oracle user name specified when DA-Oracle was installed (see Configuring DA-Oracle on page 11). To create a backup item for a database in a non-default copy of Oracle, you specify the other Oracle user name in the Options field of the backup item.


Offline (‘Cold’) Backup

Backup method:    Oracle offline
Backup command:   ORAofflne

Steps

COSbackup performs the following steps when you back up a database using the ‘Oracle offline’ method.

  1. Shut down the database.
  2. Bring the database back in a restricted mode.
  3. Query the database to find the relevant files (control files, redo logs and tablespaces) and store their locations in a COSmanager table.
  4. Shut down the database.
  5. Back up files.
  6. Restart the database.

Notes

The tablespaces are backed up using a multi-part image. The control files and the redo logs are backed up using cpio. ORAofflne follows symbolic links—that is, it backs up the target of any link, not just the link itself.

If the database is online when the backup job starts, DA-Oracle will try to shut it down. If the database cannot be shut down or restarted in restricted mode, the backup job will exit.

By default, DA-Oracle will bring the database back online after an offline backup ends. You can override this in the backup item definition by specifying -d in the Options field.


Online (‘Hot’) Backup

Backup method:    Oracle online
Backup command:   ORAonline

Steps

COSbackup performs the following steps when you back up a database or selected tablespaces using the ‘Oracle online’ method.

  1. Query the database to find the relevant files (control files, archive logs and tablespaces) and store their locations in a COSmanager table.
  2. Put the tablespace into backup mode.
  3. Back up the tablespace.
  4. Bring the tablespace back online.
  5. Repeat steps 2 to 4 for each tablespace.
  6. Switch the redo log files to close the backup (as far as Oracle is concerned).
  7. Back up the archived redo log files.
  8. Back up the control file to a disk file, then back up to tape.

Notes

The database must be run in ARCHIVELOG mode and must be online when the backup job starts. If the database is offline or if DA-Oracle can’t find the location of the relevant files, the backup job will exit.

This provides a complete snapshot of the database or selected tablespaces at the completion of the backup (not the start). Only one tablespace is taken offline and backed up at a time.

The tablespaces are backed up using a multi-part image. The control files and the redo logs are backed up using cpio. ORAofflne follows symbolic links—that is, it backs up the target of any link, not just the link itself.


Archive

Backup method:    Oracle archive
Backup command:   ORAarch

Steps

  1. Query the database to find the redo log files and archive destination.
  2. Switch the redo log files to close the backup (as far as Oracle is concerned).
  3. Back up the archived redo logs.

Notes

This should be performed frequently (several times per day or hour) from an automatic backup job.

We recommend that you append each days backups to a single media set, to make restores faster and to use tapes more efficiently.

The backup is written in cpio format, so you can restore files from the command line using cpio if necessary.

The database must be online when the backup job starts.

If the redo log files can’t be found (for example if they have already been compressed or removed) the backup job will return exit status 2 and terminate.


Export

Oracle supports three ‘full database’ export modes: complete, cumulative, and incremental. DA-Oracle supports two of these modes: complete and cumulative.

Table 1 - Oracle export modes and DA-Oracle backup methods
Oracle export mode What tables are exported DA-Oracle backup method
Complete All tables in the database Oracle full export
Tables owned by specified users Oracle selected exp
A list of specified tables Oracle selected exp
Cumulative Only tables that have changed since the last Cumulative or Complete export Oracle incr export
Incremental Only tables that have changed since the last Incremental or Cumulative or Complete export (not supported in DA-Oracle)


Notes

The database must be online when the backup job starts.

All exports are first written to a temporary file, then this file is backed up using an ‘image’ method.


Defining Oracle Backups

You must define a backup item for each type of backup that you want to perform on a database instance. For example, if the monthly cycle of backups for a particular database includes online and offline backups, backups of archived redo log files, and a complete export, you will need to define four backup items.

Once you have defined all your backup items, you must define a set of backup jobs to back up these items at the scheduled times. See How to Define a Backup Job in the COSbackup User Guide.

How to Define a Backup Item

A backup item describes the ‘what’ and ‘how’ of a backup. It identifies the host name and Oracle SID, and the method that will be used to back it up.

How you specify the exact Oracle object to be backed up depends on the backup method.

Each backup method calls a driver script to back up the data. Table 2 shows the backup command and other attributes for each Oracle backup method.

Table 2 - Oracle backup methods
Oracle Data Object Method Name Format Driver Script Index?
Full SID (offline backup) Oracle offline oracle ORAofflne no
Full SID (online backup) Oracle online oracle ORAonline no
Archive logs Oracle archive cpio ORAarch yes
Database (complete export) Oracle full export image ORAexport no
Database (cumulative export) Oracle incr export image ORAexport no
Specified tables or owners (export) Oracle selected exp image ORAexport no


You can use the Options field to pass extra flags and arguments to the backup command. To see what options are supported by each method, check the man page for that driver script.

Note that these options are not validated when you define the backup item, but are simply passed to the backup command to be evaluated at run time.


To define a backup item

  1. Select COSbackup configuration > Maintain backup jobs.
  2. Select Items > Maintain to display the list of existing backup items, then select Maintain > Add.
    Item
    Defaults to one more than the current highest item number. You can change it to any unused item number, but it is recommended that you accept the default.
    Object
    Enter the SID of the instance to be backed up. Make sure that it is correct, as COSbackup doesn’t check that it exists at this point.
    Host
    Select the host on which the database is stored. If you want to back up the same database on multiple hosts, you must define a separate backup item for each.
    Method
    Press Choose to list the backup methods.
    Index
    Select ‘yes’ if you chose the ‘Oracle archive’ method. An onlineindex makes it easier to select particular archived redo logs to be restored.
    Options
    Enter any optional flags and arguments to be passed to the backup command at run time. For example, enter -u username to specify another Oracle version if more than one copy of Oracle is installed on this host.
    You can see what other options this backup method supports by checking the man page for the corresponding backup driver script. Table 2 shows what driver script is run by each Oracle backup method.
    Note - Use double quotes around file patterns to ensure that they are parsed correctly.
    Comment
    Enter a descriptive comment.
    On error
    Should the backup job continue if this step fails?
  3. Select ‘continue’ if the job should continue after an error in this step.
  4. Select ‘abort’ if the job should not continue.

Press Accept to save this item.