Backup3G/User Guide/Managing Removable Media

This page was last modified 11:01, 6 March 2008.

From Documentation

< Backup3G | User Guide(Difference between revisions)

Jump to: navigation, search

Current revision

This section provides detailed instructions and worked examples related to media management under backup3G, including:

setting up the media database
adding details of a media batch or a single volume
reading and maintaining media details
searching online indexes and the media contents table for files and directories.

1 How To Read and Maintain Media Details
2 How To Read Backup Media Contents

[edit]

How To Read and Maintain Media Details

Each volume in the media database is identified by a unique number. You can electronically label tapes and diskettes with this number to prevent them from being accidentally reused by another backup job.

Backup3G helps you to track tapes and other media, including:

used media containing current backup data, in particular media that have been sent offsite or to another onsite location
unused or expired media that are available to be requested by a backup job or that will become available in the near future

The media database contains two kinds of information: media details (information about media), and media contents (information about the backup data they contain). You can view either media details and contents using the Report and View options in the Media module:

Table 7 — Media contents—viewing and reporting options
Report options	View options
All onsite scratch and expired media	All media
Media that will have expired after N days	All scratch and expired media
Offsite media that will expire within N days, and are due to be returned	All active media, both expired and nonexpired (displayed differently)
Media written in last N days Media at specified location	Media of a specified type

See How To Read Backup Media Contents for details of browsing online indexes and information on backup data.

[edit]

Adding a New Media Location

You must add details of any locations where media are stored:

onsite and offsite locations used for media storage
auto-loading devices such as a jukebox or tape silo
load areas (for example, a computer-room trolley).

When you add drive details, you must specify the location from where media are loaded into the drive.

To add a media location

From the backup3G configuration menu, select Maintain tables.
Select the ‘Site/Media Location’ table, then select Table > Maintain.
Select Maintain > Add.
Enter the following fields:
Location
A short name used to identify the location.
Name
Enter the name in full, or a brief description of the location.
Type
The valid types are:
onsite             media will remain here after backups.
offsite            backup media will be held at this site for secure storage.
load_device   an autoloading device such as a tape stacker.
load_area      an interim location used to transport or hold media, such as a trolley or security box.
other              media are neither backed up nor stored here.
Address
The mailing address for returning media to this location.
Phone
Used for informational purposes.
Slots
For a load_device, the maximum number of tapes that can be stored.
Press Accept to save this media location.

[edit]

Adding Backup Media Details

You can add details of a batch of backup media or a single volume. Either way the details stored for each volume are the same. However by storing batch information you can keep track of (for example) the value and reliability of different brands of media over time.

Note: You can only add media to an onsite location. To use new tapes in an auto-loading device, first add the batch to an onsite location, then allocate the volumes to the load device.

To add a media batch

Select Media from the backup3G button bar.
Select Maintain > Add batch to display a prompt form which can be filled in as shown in Figure 31.
Batch
The batch number.
Media type
Press Choose to display the available media types. If none of these is correct, exit now and add a new media type through Maintain > Media type.
Brand
This can be used for media control purposes, for example to keep a purchase history.
Vendor
Used for information/media control only.
Date purchased
Used for information/media control only.
Location
The onsite location where this batch of media will normally be stored (for example, a tape library or load device).
Comments
Reorder details or the vendor’s contact details. Used for information only.
Number in batch
Enter the number of tapes or disks in the batch.
Add to media table?
Select ‘yes’ to add details of each volume to the media table.
Example: if Number in batch is 4, and Starting media number is 1012, backup3G will add volumes 1012, 1013, 1014, and 1015 to the media table.
If you wish to add the media manually to the media table later, or already have done so, then select ‘no’.
Starting media number
Enter a media number for the first volume in the batch (only if adding media to media table). Defaults to one more than the current highest.
Press Accept to add this batch of media.

These volumes will be added to the media table with a usage of ‘scratch’, meaning they are now available to be selected for use by a backup job.

If you want to load these new media into a stacker, you must now allocate them to the device’s load location. See Allocating Tapes to a Stacker.

To add details of a single volume

Single volumes can be added directly to the media details table.

Select backup3G configuration > Maintain Tables.
Select the ‘Media Details’ table, then select Table > Maintain.
Select Maintain > Add to display the ‘Add Media Details’ form.
Specify the type. The default usage for a new volume is ‘scratch’.
Ensure the location is correct and Accept the details.

Figure 32 — Add media details prompt form

To change details of a single volume

This allows you to change details of individual tapes. During day-to-day operations you would typically use this to update fields such as the expiry date of a backup. During initial configuration you can add details of existing media in a library, for example to set the expiry date, usage, date written and location of those volumes in use before backup3G was installed.

Select backup3G configuration > Maintain Tables.
Select the ‘Media Details’ table from the list of tables.
Select the volume you want to update, then select Maintain > Change.

You can maintain any of the following fields:

Number: A unique number to identify this volume.
Type: The media type, which is typically named after its type, length, density, capacity, or label type.
Usage: If this is a new or unused volume, select ‘scratch’. Predefined usage types are:; scratch currently unused and available for backups and archives.; archive contains current archive data—not available until expired.; backup contains current backup data—not available until expired.; release used for release software—not available for backups.
Written: If Usage is not ‘scratch’, enter the date that the volume was last written. backup3G uses this to balance media usage, by selecting for new backups the volume with the oldest ‘date last written’.
Expires: If this is not a scratch volume, enter the date the backup will expire and the volume will be available for reuse. This will ensure that this volume is not reselected until the expiry date has passed.
Batch: If this volume belongs to a media batch, press Choose to select the batch number. This is optional.
Location: The location where this volume is stored now. This may be an onsite or offsite location, or a load_area or load_device.
Slot: If this is loaded in a load_device, the current slot number.
Date sent offsite: If this volume is currently at another location, enter the date it was sent offsite. Blank if onsite.
Uses: The number of times the volume has been used. You can use this field to decide when to ‘retire’ a volume. A newly labeled volume will have a Uses value of 1.
Description: The backup job description is copied to this field as a description of the contents of the volume.
Set ID: If this volume is part of a multi-volume backup set, the Set ID is the media number of the first volume in the set.
Sequence: If this volume is part of a multi-volume backup set, the sequence number is the position of this volume in the set (e.g. ‘2’ if it is the second volume.) For a single volume backup, set Sequence to 1.

Press Accept to add this volume to the media table.

To label a volume

Backup3G can electronically label backup tapes using details from the media table.

Select Drive from the backup3G button bar.
Choose the drive into which the tape or diskette will be loaded.
Perform Label > Write label
Backup3G lists the numbers for all the media that are valid for this drive type. Choose a media number to be written to the label.
Backup3G displays a warning that any data on this volume will be erased. You will be asked to confirm that you want to label it. You will also be warned if the volume is already labeled with a different number or if the selected number is already in use, but you will be able to proceed.
backup3G asks you to confirm that the volume is in the drive. Load it now if you haven’t already done so, and press Accept.

Caution: Don’t label tapes that already contain data you wish to keep. The label file will overwrite the front of the tape, usually rendering the data on the tape unreadable.

Backup3G confirms that the label has been written and verified.

A small file containing the media number is written to the volume, at the beginning in the case of a tape and at the end in the case of a diskette. The format of the label depends on the ‘label type’ defined for this media type. Any backup job that requests this media number will check that the label is correct before proceeding.

It is not necessary to label media when they are first added to the media database. If an unlabeled scratch volume is loaded, backup3G checks that this volume hasn’t already been used, and asks the operator to confirm whether it should be labeled now.

To read a media label

You may want to check the electronic label on a volume, for example if the paper label on the outside of the case falls off.

Select Drive from the backup3G button bar.
Select the drive name you want to use.
Select Label > Read label. backup3G prompts you to load the tape or disk into the drive.When the volume is loaded, press Accept.

[edit]

Adding a New Media Type

Each unique storage format used for backup is stored as a media type. You can specify which media type a backup should be written to. For example, using the same drive, you could choose to do a full backup of a large filesystem to a 5–gigabyte Exabyte tape, and smaller backups to lower capacity 2–gigabyte tapes. As new formats become available you can add them to the ‘Media Type’ table and use them when defining backup jobs.

It is important to define the capacity and partition size for each media type that might be used to write multi-part backups. This information is used to split large backups efficiently over several parts or volumes.

To add a media type

Select Media from the backup3G button bar.
Select Maintain > Media type.
Select an existing media type with similar attributes, then select Table > Clone. If there are no similar media types, select Table > Add.

Enter the following fields:

Type: Enter the name of the media type you are defining.
Block size (KB): Choose a blocksize that yields efficient backup and recovery performance. A smaller block size means more inter-block gaps, which slows the backup and reduces the effective capacity of the tape. Check the drive specifications to see if there are any limitations on the block size.
Length (feet): The length of the tape. This is optional.
Density (BPI): The density (in bits per inch) at which the volume is written and read. This is optional.
Capacity (KB): The usable (formatted) capacity of the volume in kilobytes. This value is required to be fairly accurate if the volume is to be used for multi-volume backups. For diskettes, subtract 1 kilobyte to allow room for the end label.
Multi-part size (KB): Backups can be written over several tape files or parts to speed recovery of selected files. This field defines a ‘part size’ that is some fraction of the capacity of a full volume.
Description: Briefly describe the media type, indicating its capacity, density, part size, etc.
Label type: This determines what label format and method will be used to electronically label volumes:; COSstdtape writes a short file containing the media number and ‘date last written’ to the start of the tape, and an end-of-data marker after the last file (recommended).; COSstdBOT writes the label to the start of a tape, but doesn’t write an end-ofdata marker.; end_label writes the label to the last block of a diskette.; sV_ filesys System V filesystem label using the labelit command.; blank volumes will not be labeled.

Press Accept to save this media type information.

[edit]

Recording a Media Maintenance History

Backup3G can record a history of preventive or corrective maintenance procedures. This is useful for judging when to retire a set of tapes, and for comparing the lifespan of different types and brands of storage media.

Note: These options don’t actually do any physical maintenance; they simply record the fact that the maintenance was done.

Media maintenance facilities are found under backup3G configuration > Maintain tables. The ‘Media Maint Procedure’ table lists the maintenance procedures that can be performed. The ‘Media Maint Record’ table contains a log of maintenance procedures that have been performed.

To record a maintenance procedure on a volume

Select backup3G configuration > Maintain tables.
Select the ‘Media Maint Record’ table. backup3G displays the maintenance history for all media.
Select Table > Maintain.
Select Maintain > Add.

Figure 34 — Add media maintenance details prompt.

Number: Choose the number of the volume that is being maintained.
Date: When the procedure was performed.
Maintenance: Select from the list of known maintenance procedures. If none of the predefined procedures is suitable, you can add a new one to the ‘Media Maint Procedure’ table.
Person: Who performed the procedure? Default => the current user.

Press Accept.

[edit]

How To Read Backup Media Contents

Backup3G stores information about completed backup jobs in the media database, including:

when the job ran
which base directories were backed up
which backup method was used.

To display details of all media in the media database

Select Media from the backup3G button bar.

The initial view shows all media in the database. Other options on the View and Reports menus display a subset of the media database – for example, media at a specified location or scratch media.

[edit]

Media contents

There are a few ways to browse media contents, depending on whether an online index exists, and on whether you want to print the output or go on to recover files:

Using the online index: if an index exists, you can either search for an exact file name or display a list of all media containing file names that match a pattern.

Using base directory information: for all backups, regardless of whether an index exists, you can browse high-level information about the contents of each backup medium. The media contents table stores the base directory for each step that wrote to the media set.

The starting point for all these options is the Recovery module:

Search > Base directories lets you search the media contents database for selected backups on selected hosts
Search > Files lets you search all online indexes for selected files on selected hosts
Contents > Open lists base directories for a selected backup.

Once you have found the right backup, you can recover selected files and directories or the whole backup.

[edit]

Search Media Contents for Base Directories

Select Recover from the backup3G button bar.
Select Search > Base Directories to display a form similar to that shown in Figure 35.

Figure 35 — Searching media contents

Base directory/pattern: Enter the base directory name if you know it, or press Choose to select from a list. You can also limit the search to the subset of directories that match a pattern such as a partial base directory name or a regular expression. For example, enter the regular expression /usr/l to match /usr/local, /usr/lib, /usr/lost+found, etc. Enter * and select Pattern type ‘filepat’ to list all base directories.

For more examples see Searching Backup Media.

Host: Enter the name of the host machine where the data was backed up from, or choose from the list of hosts. Leave this field blank to display backups for all hosts.
Written on or after: Limit the search to backups written from this date until today.
Written on or before: Limit the search to backups written on this date or earlier.
Pattern type: Select ‘filepat’ to treat the contents of the Basedirectory/pattern field as a shell file pattern. Select ‘regexp’ to treat the contents of Base directory/pattern as a regular expression.

Press Accept to initiate the search.

Backup3G lists each media set containing a backup of a base directory matching the pattern, including its current location. You can recover selected directories in background or interactive mode from this list. If the list is long, use the Search function to jump to a particular directory by entering all or part of the name.

If the list is long, use the Search function to jump to a particular directory by entering all or part of the name.

[edit]

Search Online Indexes for Backup Files

You can search one index to display all the files in a media set, or search all the indexes to find files that match a given name or pattern.

Note: Searching a large number of indexes can be very slow. Use a start and end date to limit the search to a shorter period.

Backup3G lists details similar to that produced by the ls -l command, including the full path name, for each file name matching the pattern.

To search through all online indexes

Select Recover from the backup3G button bar.
Select Search > Files to display a form similar to that shown in Figure 36.

Figure 36 — Searching online media indexes

Filename/pattern: Enter the file name or some part of it. If you enter part of the name, backup3G will list all file names that contain those characters. See Searching Backup Media. You must enter at least a partial file name.; The type of matching is determined by Pattern type.
Base directory/pattern: Enter the base directory name if you know it, or press Choose to select from a list. Enter a pattern (e.g. part of a base directory name) to limit the search to a subset of directories. Leave this field blank to search all backups.
Host: Enter the name of the host machine where the data were originally stored, or choose from the list of hosts. This field is optional. If it is left blank, all indexes are searched.
Written on or after: Limit the search to backups written from this date until today.
Written on or before: Limit the search to backups written on this date or earlier.
Pattern type: Select ‘filepat’ to treat the contents of Filename/pattern and Base directory/pattern as shell file patterns. Select ‘regexp’ to treat them as regular expressions.

Press Accept to list all the file names that match the search criteria. Note that a file will appear once for each time it has been backed up – there may be several versions of a file spread over several media sets.

Note: On labeled tapes, the label is contained in the first file on the tape. Each backup step that writes to the tape creates additional files.

To list the contents of a single media set

From the Recovery console, choose the media set.
Select Contents > Open. backup3G lists each volume and base directory on a separate line.
Select the step that backed up the data you wish to recover; use Index > Open to list the contents of the backup step if an index was created. Use the Search function to look for an exact file name.
If more than one backup step wrote to the media set, the high-level directory for each one will be listed separately. Select each one in turn to list all files in the set.

You can create, delete and open any indexes that exist and recover selected steps in background or interactive mode from this list.

Retrieved from "https://documentation.fs.com.au/index.php/Backup3G/User_Guide/Managing_Removable_Media"

 *searching online indexes and the media contents table for files and directories.
+<br>
 == How To Read and Maintain Media Details ==
 Each volume in the media database is identified by a unique number. You can electronically label tapes and diskettes with this number to prevent them from being accidentally reused by another backup job.
-backup3G helps you to track tapes and other media, including:
+Backup3G helps you to track tapes and other media, including:
 *used media containing current backup data, in particular media that have been sent offsite or to another onsite location
 *unused or expired media that are available to be requested by a backup job or that will become available in the near future
 The media database contains two kinds of information: media details (information about media), and media contents (information about the backup data they contain). You can view either media details and contents using the Report and View options in the Media module:
-{| cellpadding="2" cellspacing="0" border="1"
-|-
+{| border="1" cellpadding="6" cellspacing="0"
+|+Table 7 — Media contents—viewing and reporting options
 |Report options
 |View options
 |Media of a specified type
 |}
-<strong>Table 7 — Media contents—viewing and reporting options</strong>
 See [[How To Read Backup Media Contents]] for details of browsing online indexes and information on backup data.
-=== Adding a New Media Location ===
+<br>
+=== Adding a New Media Location ===
 You must add details of any locations where media are stored:
 *onsite and offsite locations used for media storage
 *auto-loading devices such as a jukebox or tape silo
 *load areas (for example, a computer-room trolley).
 When you add drive details, you must specify the location from where media are loaded into the drive.
-==== To add a media location ====
+'''To add a media location'''
 #From the backup3G configuration menu, select Maintain tables.
 #Select the ‘Site/Media Location’ table, then select Table > Maintain.
 #Select Maintain > Add.
+#Enter the following fields:
+#;Location: A short name used to identify the location.
+#;Name: Enter the name in full, or a brief description of the location.
+#;Type: The valid types are:
+#:''onsite'' &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;media will remain here after backups.
+#:''offsite'' &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;backup media will be held at this site for secure storage.
+#:''load_device'' &nbsp;&nbsp;an autoloading device such as a tape stacker.
+#:''load_area'' &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;an interim location used to transport or hold media, such as a trolley or security box.
+#:''other'' &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;media are neither backed up nor stored here.
+#;Address: The mailing address for returning media to this location.
+#;Phone: Used for informational purposes.
+#;Slots: For a load_device, the maximum number of tapes that can be stored.
+#Press Accept to save this media location.
-Enter the following fields:
+<br>
-;Location: a short name used to identify the location.
-;Name: enter the name in full, or a brief description of the location.
-;Type: the valid types are:
-:;onsite: media will remain here after backups.
-:;offsite: backup media will be held at this site for secure storage.
-:;load_device: an autoloading device such as a tape stacker.
-:;load_area: an interim location used to transport or hold media, such as a trolley or security box.
-:;other: media are neither backed up nor stored here.
-;Address: the mailing address for returning media to this location.
-;Phone: used for informational purposes.
-;Slots: For a load_device, the maximum number of tapes that can be stored.
-Press Accept to save this media location.
 === Adding Backup Media Details ===
 You can add details of a batch of backup media or a single volume. Either way the details stored for each volume are the same. However by storing batch information you can keep track of (for example) the value and reliability of different brands of
 media over time.
- Note You can only add media to an onsite location.
- To use new tapes in an auto-loading device, first add the batch to an onsite location, then allocate the volumes to the load device.
-==== To add a media batch ====
+----
-#Select Media from the backup3G button bar.
+;Note: You can only add media to an onsite location. To use new tapes in an auto-loading device, first add the batch to an onsite location, then allocate the volumes to the load device.
-#Select Maintain > Add batch to display a prompt form which can be filled in as shown in Figure 31.
+----
- Figure 31 — Add batch details prompt form
-;Batch: The batch number.
+'''To add a media batch'''
-;Media type: Press Choose to display the available media types. If none of these is correct, exit now and add a new media type through Maintain > Media type.
- Note A physical media format can have more than one entry in the media table.
-;Brand: This can be used for media control purposes, for example to keep a purchase history.
-;Vendor: Used for information/media control only.
-;Date purchased: Used for information/media control only.
-;Location: The onsite location where this batch of media will normally be stored (for example, a tape library or load device).
-;Comments: Reorder details or the vendor’s contact details. Used for information only.
-;Number in batch: Enter the number of tapes or disks in the batch.
-;Add to media table?: Select ‘yes’ to add details of each volume to the media table.
-If you wish to add the media manually to the media table later, or already have done so, then select ‘no’.
+#Select Media from the backup3G button bar.
-Starting media number Enter a media number for the first volume in the batch (only if adding media to media table). Defaults to one more than the current highest.
+#Select Maintain > Add batch to display a prompt form which can be filled in as shown in Figure 31.
+#;Batch: The batch number.
+#;Media type: Press Choose to display the available media types. If none of these is correct, exit now and add a new media type through Maintain > Media type.
+#;Brand: This can be used for media control purposes, for example to keep a purchase history.
+#;Vendor: Used for information/media control only.
+#;Date purchased: Used for information/media control only.
+#;Location: The onsite location where this batch of media will normally be stored (for example, a tape library or load device).
+#;Comments: Reorder details or the vendor’s contact details. Used for information only.
+#;Number in batch: Enter the number of tapes or disks in the batch.
+#;Add to media table?: Select ‘yes’ to add details of each volume to the media table.
+#:Example: if Number in batch is 4, and Starting media number is 1012, backup3G will add volumes 1012, 1013, 1014, and 1015 to the media table.
+#:If you wish to add the media manually to the media table later, or already have done so, then select ‘no’.
+#;Starting media number: Enter a media number for the first volume in the batch (only if adding media to media table). Defaults to one more than the current highest.
+#Press Accept to add this batch of media.
-Press Accept to add this batch of media.
 These volumes will be added to the media table with a usage of ‘scratch’, meaning they are now available to be selected for use by a backup job.
 If you want to load these new media into a stacker, you must now allocate them to the device’s load location. See [[Allocating Tapes to a Stacker]].
-==== To add details of a single volume ====
+'''To add details of a single volume'''
 Single volumes can be added directly to the media details table.
 #Select backup3G configuration > Maintain Tables.
  Figure 32 — Add media details prompt form
-==== To change details of a single volume ====
+'''To change details of a single volume'''
 This allows you to change details of individual tapes. During day-to-day operations you would typically use this to update fields such as the expiry date of a backup. During initial configuration you can add details of existing media in a library, for
 example to set the expiry date, usage, date written and location of those volumes in use before backup3G was installed.
 #Select the ‘Media Details’ table from the list of tables.
 #Select the volume you want to update, then select Maintain > Change.
 You can maintain any of the following fields:
-;Number: a unique number to identify this volume.
+;Number: A unique number to identify this volume.
-;Type: the media type, which is typically named after its type, length, density, capacity, or label type.
+;Type: The media type, which is typically named after its type, length, density, capacity, or label type.
 ;Usage: If this is a new or unused volume, select ‘scratch’. Predefined usage types are:
-:;scratch: currently unused and available for backups and archives.
+:''scratch'' &nbsp;&nbsp;&nbsp;&nbsp;currently unused and available for backups and archives.
-:;archive: contains current archive data—not available until expired.
+:''archive'' &nbsp;&nbsp;&nbsp;contains current archive data—not available until expired.
-:;backup: contains current backup data—not available until expired.
+:''backup'' &nbsp;&nbsp;&nbsp;contains current backup data—not available until expired.
-:;release: used for release software—not available for backups.
+:''release'' &nbsp;&nbsp;&nbsp;&nbsp;used for release software—not available for backups.
-;Written: if Usage is not ‘scratch’, enter the date that the volume was last written. backup3G uses this to balance media usage, by selecting for new backups the volume with the oldest ‘date last written’.
+;Written: If Usage is not ‘scratch’, enter the date that the volume was last written. backup3G uses this to balance media usage, by selecting for new backups the volume with the oldest ‘date last written’.
-;Expires: if this is not a scratch volume, enter the date the backup will expire and the volume will be available for reuse. This will ensure that this volume is not reselected until the expiry date has passed.
+;Expires: If this is not a scratch volume, enter the date the backup will expire and the volume will be available for reuse. This will ensure that this volume is not reselected until the expiry date has passed.
-;Batch: if this volume belongs to a media batch, press Choose to select the batch number. This is optional.
+;Batch: If this volume belongs to a media batch, press Choose to select the batch number. This is optional.
-;Location: the location where this volume is stored now. This may be an onsite or offsite location, or a load_area or load_device.
+;Location: The location where this volume is stored now. This may be an onsite or offsite location, or a load_area or load_device.
-;Slot: if this is loaded in a load_device, the current slot number.
+;Slot: If this is loaded in a load_device, the current slot number.
-;Date sent offsite: if this volume is currently at another location, enter the date it was sent offsite. Blank if onsite.
+;Date sent offsite: If this volume is currently at another location, enter the date it was sent offsite. Blank if onsite.
-;Uses: the number of times the volume has been used. You can use this field to decide when to ‘retire’ a volume. A newly labeled volume will have a Uses value of 1.
+;Uses: The number of times the volume has been used. You can use this field to decide when to ‘retire’ a volume. A newly labeled volume will have a Uses value of 1.
-;Description: the backup job description is copied to this field as a description of the contents of the volume.
+;Description: The backup job description is copied to this field as a description of the contents of the volume.
-;Set ID: if this volume is part of a multi-volume backup set, the Set ID is the media number of the first volume in the set.
+;Set ID: If this volume is part of a multi-volume backup set, the Set ID is the media number of the first volume in the set.
-;Sequence:  if this volume is part of a multi-volume backup set, the sequence number is the position of this volume in the set (e.g. ‘2’ if it is the second volume.) For a single volume backup, set Sequence to 1.
+;Sequence:  If this volume is part of a multi-volume backup set, the sequence number is the position of this volume in the set (e.g. ‘2’ if it is the second volume.) For a single volume backup, set Sequence to 1.
 Press Accept to add this volume to the media table.
-==== To label a volume ====
-backup3G can electronically label backup tapes using details from the media table.
+'''To label a volume'''
+Backup3G can electronically label backup tapes using details from the media table.
 #Select Drive from the backup3G button bar.
 #Choose the drive into which the tape or diskette will be loaded.
 #Perform Label > Write label
-#backup3G lists the numbers for all the media that are valid for this drive type. Choose a media number to be written to the label.
+#Backup3G lists the numbers for all the media that are valid for this drive type. Choose a media number to be written to the label.
-#backup3G displays a warning that any data on this volume will be erased. You will be asked to confirm that you want to label it. You will also be warned if the volume is already labeled with a different number or if the selected number is already in use, but you will be able to proceed.
+#Backup3G displays a warning that any data on this volume will be erased. You will be asked to confirm that you want to label it. You will also be warned if the volume is already labeled with a different number or if the selected number is already in use, but you will be able to proceed.
 #backup3G asks you to confirm that the volume is in the drive. Load it now if you haven’t already done so, and press Accept.
- Caution Don’t label tapes that already contain data you wish to keep.
- The label file will overwrite the front of the tape, usually rendering the data on the tape unreadable.
-backup3G confirms that the label has been written and verified.
+----
+;Caution: Don’t label tapes that already contain data you wish to keep. The label file will overwrite the front of the tape, usually rendering the data on the tape unreadable.
+----
+Backup3G confirms that the label has been written and verified.
 A small file containing the media number is written to the volume, at the beginning in the case of a tape and at the end in the case of a diskette. The format of the label depends on the ‘label type’ defined for this media type. Any backup job that requests this media number will check that the label is correct before proceeding.
 It is not necessary to label media when they are first added to the media database. If an unlabeled scratch volume is loaded, backup3G checks that this volume hasn’t already been used, and asks the operator to confirm whether it should be labeled now.
-==== To read a media label  ====
+'''To read a media label'''
 You may want to check the electronic label on a volume, for example if the paper label on the outside of the case falls off.
 #Select the drive name you want to use.
 #Select Label > Read label. backup3G prompts you to load the tape or disk into the drive.When the volume is loaded, press Accept.
+<br>
 === Adding a New Media Type ===
 It is important to define the capacity and partition size for each media type that might be used to write multi-part backups. This information is used to split large backups efficiently over several parts or volumes.
-To add a media type
+'''To add a media type'''
 #Select Media from the backup3G button bar.
 #Select Maintain > Media type.
 #Select an existing media type with similar attributes, then select Table > Clone. If there are no similar media types, select Table > Add.
 Enter the following fields:
 ;Type: Enter the name of the media type you are defining.
 ;Block size (KB): Choose a blocksize that yields efficient backup and recovery performance. A smaller block size means more inter-block gaps, which slows the backup and reduces the effective capacity of the tape. Check the drive specifications to see if there are any limitations on the block size.
-;Length (feet): the length of the tape. This is optional.
+;Length (feet): The length of the tape. This is optional.
-;Density (BPI): the density (in bits per inch) at which the volume is written and read. This is optional.
+;Density (BPI): The density (in bits per inch) at which the volume is written and read. This is optional.
-;Capacity (KB): the usable (formatted) capacity of the volume in kilobytes. This value is required to be fairly accurate if the volume is to be used for multi-volume backups. For diskettes, subtract 1 kilobyte to allow room for the end label.
+;Capacity (KB): The usable (formatted) capacity of the volume in kilobytes. This value is required to be fairly accurate if the volume is to be used for multi-volume backups. For diskettes, subtract 1 kilobyte to allow room for the end label.
 ;Multi-part size (KB): Backups can be written over several tape files or parts to speed recovery of selected files. This field defines a ‘part size’ that is some fraction of the capacity of a full volume.
-;Description: briefly describe the media type, indicating its capacity, density, part size, etc.
+;Description: Briefly describe the media type, indicating its capacity, density, part size, etc.
-;Label: type This determines what label format and method will be used to electronically label volumes:
+;Label type: This determines what label format and method will be used to electronically label volumes:
-:;COSstdtape: writes a short file containing the media number and ‘date last written’ to the start of the tape, and an end-of-data marker after the last file (recommended).
+:''COSstdtape'' &nbsp;&nbsp;writes a short file containing the media number and ‘date last written’ to the start of the tape, and an end-of-data marker after the last file (recommended).
-:;COSstdBOT: writes the label to the start of a tape, but doesn’t write an end-ofdata marker.
+:''COSstdBOT'' &nbsp;&nbsp;writes the label to the start of a tape, but doesn’t write an end-ofdata marker.
-:;end_label: writes the label to the last block of a diskette.
+:''end_label'' &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;writes the label to the last block of a diskette.
-:;sV_ filesys: System V filesystem label using the labelit command.
+:''sV_ filesys'' &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;System V filesystem label using the labelit command.
-:;blank: volumes will not be labeled.
+:''blank'' &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;volumes will not be labeled.
 Press Accept to save this media type information.
+<br>
 === Recording a Media Maintenance History ===
-backup3G can record a history of preventive or corrective maintenance procedures.
-This is useful for judging when to retire a set of tapes, and for comparing the lifespan
+Backup3G can record a history of preventive or corrective maintenance procedures. This is useful for judging when to retire a set of tapes, and for comparing the lifespan of different types and brands of storage media.
-of different types and brands of storage media.
-Note These options don’t actually do any physical maintenance; they simply
-record the fact that the maintenance was done.
+----
-Media maintenance facilities are found under backup3G configuration >
+;Note: These options don’t actually do any physical maintenance; they simply record the fact that the maintenance was done.
-Maintain tables. The ‘Media Maint Procedure’ table lists the maintenance
+----
-procedures that can be performed. The ‘Media Maint Record’ table contains a log of
-maintenance procedures that have been performed.
-Managing Removable Media
+Media maintenance facilities are found under backup3G configuration > Maintain tables. The ‘Media Maint Procedure’ table lists the maintenance procedures that can be performed. The ‘Media Maint Record’ table contains a log of maintenance procedures that have been performed.
 To record a maintenance procedure on a volume
-. Select backup3G configuration > Maintain tables.
+#Select backup3G configuration > Maintain tables.
-. Select the ‘Media Maint Record’ table.
+#Select the ‘Media Maint Record’ table. backup3G displays the maintenance history for all media.
-backup3G displays the maintenance history for all media.
+#Select Table > Maintain.
-. Select Table > Maintain.
+#Select Maintain > Add.
-. Select Maintain > Add.
-Figure 34 — Add media maintenance details prompt.
+ Figure 34 — Add media maintenance details prompt.
-Number Choose the number of the volume that is being maintained.
-Date When the procedure was performed.
+;Number: Choose the number of the volume that is being maintained.
-Maintenance Select from the list of known maintenance procedures. If none of
+;Date: When the procedure was performed.
-the predefined procedures is suitable, you can add a new one to the
+;Maintenance: Select from the list of known maintenance procedures. If none of the predefined procedures is suitable, you can add a new one to the ‘Media Maint Procedure’ table.
-‘Media Maint Procedure’ table.
+;Person: Who performed the procedure? Default => the current user.
-Person Who performed the procedure? Default => the current user.
 Press Accept.
-Managing Removable Media 127
-How To Read Backup Media Contents
+<br>
-backup3G stores information about completed backup jobs in the media database,
-including:
+== How To Read Backup Media Contents ==
-• when the job ran
-• which base directories were backed up
+Backup3G stores information about completed backup jobs in the media database, including:
-• which backup method was used.
+*when the job ran
+*which base directories were backed up
+*which backup method was used.
 To display details of all media in the media database
-. Select Media from the backup3G button bar.
+#Select Media from the backup3G button bar.
-The initial view shows all media in the database. Other options on the View and
-Reports menus display a subset of the media database – for example, media at a
-specified location or scratch media.
+The initial view shows all media in the database. Other options on the View and Reports menus display a subset of the media database – for example, media at a specified location or scratch media.
-Media contents
-There are a few ways to browse media contents, depending on whether an online
+<br>
-index exists, and on whether you want to print the output or go on to recover files:
+=== Media contents ===
-Using the online index: if an index exists, you can either search for an exact file name or
-display a list of all media containing file names that match a pattern.
+There are a few ways to browse media contents, depending on whether an online index exists, and on whether you want to print the output or go on to recover files:
-Using base directory information: for all backups, regardless of whether an index exists,
-you can browse high-level information about the contents of each backup medium.
+''Using the online index:'' if an index exists, you can either search for an exact file name or display a list of all media containing file names that match a pattern.
-The media contents table stores the base directory for each step that wrote to the
-media set.
+''Using base directory information:'' for all backups, regardless of whether an index exists, you can browse high-level information about the contents of each backup medium. The media contents table stores the base directory for each step that wrote to the media set.
 The starting point for all these options is the Recovery module:
-• Search > Base directories lets you search the media contents
+*Search > Base directories lets you search the media contents database for selected backups on selected hosts
-database for selected backups on selected hosts
+*Search > Files lets you search all online indexes for selected files on selected hosts
-• Search > Files lets you search all online indexes for selected files on
+*Contents > Open lists base directories for a selected backup.
-selected hosts
-• Contents > Open lists base directories for a selected backup.
-Managing Removable Media
+Once you have found the right backup, you can recover selected files and directories or the whole backup.
-Once you have found the right backup, you can recover selected files and directories
-or the whole backup.
+<br>
-Search Media Contents for Base Directories
+=== Search Media Contents for Base Directories ===
-. Select Recover from the backup3G button bar.
-. Select Search > Base Directories to display a form similar to that
+#Select Recover from the backup3G button bar.
-shown in Figure 35.
+#Select Search > Base Directories to display a form similar to that shown in Figure 35.
-Figure 35 — Searching media contents
-Base directory/pattern
+ Figure 35 — Searching media contents
-Enter the base directory name if you know it, or press Choose to
-select from a list.
+;Base directory/pattern: Enter the base directory name if you know it, or press Choose to select from a list. You can also limit the search to the subset of directories that match a pattern such as a partial base directory name or a regular expression. For example, enter the regular expression /usr/l to match /usr/local, /usr/lib, /usr/lost+found, etc. Enter * and select Pattern type ‘filepat’ to list all base directories.
-You can also limit the search to the subset of directories that match
-a pattern such as a partial base directory name or a regular
+:For more examples see [[Searching Backup Media]].
-expression. For example, enter the regular expression /usr/l to
-match /usr/local, /usr/lib, /usr/lost+found, etc.
+;Host: Enter the name of the host machine where the data was backed up from, or choose from the list of hosts. Leave this field blank to display backups for all hosts.
-Enter * and select Pattern type ‘filepat’ to list all base
+;Written on or after: Limit the search to backups written from this date until today.
-directories.
+;Written on or before: Limit the search to backups written on this date or earlier.
-For more examples see Searching Backup Media on page 46.
+;Pattern type:  Select ‘filepat’ to treat the contents of the Basedirectory/pattern field as a shell file pattern. Select ‘regexp’ to treat the contents of Base directory/pattern as a regular expression.
-Host Enter the name of the host machine where the data was backed up
-from, or choose from the list of hosts. Leave this field blank to
-display backups for all hosts.
-Managing Removable Media 129
-Written on or after
-Limit the search to backups written from this date until today.
-Written on or before
-Limit the search to backups written on this date or earlier.
-Pattern type Select ‘filepat’ to treat the contents of the Base
-directory/pattern field as a shell file pattern. Select ‘regexp’
-to treat the contents of Base directory/pattern as a
-regular expression.
 Press Accept to initiate the search.
-backup3G lists each media set containing a backup of a base directory matching the
-pattern, including its current location. You can recover selected directories in background
+Backup3G lists each media set containing a backup of a base directory matching the pattern, including its current location. You can recover selected directories in background or interactive mode from this list. If the list is long, use the Search function to jump to a particular directory by entering all or part of the name.
-or interactive mode from this list.
-If the list is long, use the Search function to jump to a particular directory by
+If the list is long, use the Search function to jump to a particular directory by entering all or part of the name.
-entering all or part of the name.
-Search Online Indexes for Backup Files
+<br>
-You can search one index to display all the files in a media set, or search all the
-indexes to find files that match a given name or pattern.
+=== Search Online Indexes for Backup Files ===
-Note Searching a large number of indexes can be very slow. Use a start and
-end date to limit the search to a shorter period.
+You can search one index to display all the files in a media set, or search all the indexes to find files that match a given name or pattern.
-backup3G lists details similar to that produced by the ls -l command, including
-the full path name, for each file name matching the pattern.
-To search through all online indexes
+----
-. Select Recover from the backup3G button bar.
+;Note: Searching a large number of indexes can be very slow. Use a start and end date to limit the search to a shorter period.
-. Select Search > Files to display a form similar to that shown in
+----
-Figure 36.
-Managing Removable Media
-Figure 36 — Searching online media indexes
+Backup3G lists details similar to that produced by the ls -l command, including the full path name, for each file name matching the pattern.
-Filename/pattern
-Enter the file name or some part of it. If you enter part of the
-name, backup3G will list all file names that contain those
+'''To search through all online indexes'''
-characters. See Searching Backup Media on page 46. You must enter
-at least a partial file name.
+#Select Recover from the backup3G button bar.
-The type of matching is determined by Pattern type.
+#Select Search > Files to display a form similar to that shown in Figure 36.
-Base directory/pattern
-Enter the base directory name if you know it, or press Choose to
+ Figure 36 — Searching online media indexes
-select from a list. Enter a pattern (e.g. part of a base directory
-name) to limit the search to a subset of directories. Leave this field
+;Filename/pattern: Enter the file name or some part of it. If you enter part of the name, backup3G will list all file names that contain those characters. See [[Searching Backup Media]]. You must enter at least a partial file name.
-blank to search all backups.
+:The type of matching is determined by Pattern type.
-Host Enter the name of the host machine where the data were originally
+;Base directory/pattern: Enter the base directory name if you know it, or press Choose to select from a list. Enter a pattern (e.g. part of a base directory name) to limit the search to a subset of directories. Leave this field blank to search all backups.
-stored, or choose from the list of hosts. This field is optional. If it
+;Host: Enter the name of the host machine where the data were originally stored, or choose from the list of hosts. This field is optional. If it is left blank, all indexes are searched.
-is left blank, all indexes are searched.
+;Written on or after: Limit the search to backups written from this date until today.
-Written on or after
+;Written on or before: Limit the search to backups written on this date or earlier.
-Limit the search to backups written from this date until today.
+;Pattern type: Select ‘filepat’ to treat the contents of Filename/pattern and Base directory/pattern as shell file patterns. Select ‘regexp’ to treat them as regular expressions.
-Written on or before
-Limit the search to backups written on this date or earlier.
-Managing Removable Media 131
+Press Accept to list all the file names that match the search criteria. Note that a file will appear once for each time it has been backed up – there may be several versions of a file spread over several media sets.
-Pattern type Select ‘filepat’ to treat the contents of Filename/pattern and
-Base directory/pattern as shell file patterns. Select
-‘regexp’ to treat them as regular expressions.
+----
-Press Accept to list all the file names that match the search criteria. Note that a
+;Note: On labeled tapes, the label is contained in the first file on the tape. Each backup step that writes to the tape creates additional files.
-file will appear once for each time it has been backed up – there may be several
+----
-versions of a file spread over several media sets.
-Note On labeled tapes, the label is contained in the first file on the tape.
-Each backup step that writes to the tape creates additional files.
+'''To list the contents of a single media set'''
-To list the contents of a single media set
-. From the Recovery console, choose the media set.
+#From the Recovery console, choose the media set.
-. Select Contents > Open. backup3G lists each volume and base directory
+#Select Contents > Open. backup3G lists each volume and base directory on a separate line.
-on a separate line.
+#Select the step that backed up the data you wish to recover; use Index > Open to list the contents of the backup step if an index was created. Use the Search function to look for an exact file name.
-. Select the step that backed up the data you wish to recover; use Index >
+#If more than one backup step wrote to the media set, the high-level directory for each one will be listed separately. Select each one in turn to list all files in the set.
-Open to list the contents of the backup step if an index was created. Use the
-Search function to look for an exact file name.
-. If more than one backup step wrote to the media set, the high-level directory
+You can create, delete and open any indexes that exist and recover selected steps in background or interactive mode from this list.
-for each one will be listed separately. Select each one in turn to list all
-files in the set.
+<br>
-You can create, delete and open any indexes that exist and recover selected steps
-in background or interactive mode from this list.