Backup3G/EWC/Man Pages

From Documentation

< Backup3GRevision as of 23:46, 19 February 2008; view current revision
←Older revision | Newer revision→

Jump to: navigation, search

1 COSserver
2 FSntcpio
3 FSregback
4 FSremote
5 FSsysstate
6 busplit
7 cos
8 db_date
9 devio
10 devscan
11 ewc
12 file_excl
13 file_list
14 mt
15 ntcpio
16 regback
17 rsh
18 rshd
19 service
20 tapelabel

COSserver

NAME

COSserver - remote COSmanager command execution

SYNOPSIS

COSserver -i | -install

COSserver -r | -remove

COSserver [-d]

DESCRIPTION

COSserver is a TCP service listening on port 9002 and provides remote execution facilities. It is used to execute commands requested by remote COSserver clients.

Clients connect to the server and request the execution of a command on behalf of a user. If the client has the necessary authority, theserver will execute the command and return the standard output and standard error of the command to the client. Any standard input sent from the client is passed to the command. It will also return the exit status of the command executed.

COSserver does a series of authentication steps to ensure that the request is genuine. These are:

The local hostinfo table is consulted, to ensure that the request originates from a known COSmanager host;
COSserver generates a random number, which is passed back to the host making the request. This random number is then hashed with the contents of the request, and the encrypted hash code is passed back to COSserver. COSserver then verifies that the hash code is correct.

OPTIONS

-i -install	Install COSserver as a service. Once installed, it can be controlled using the net command, or using the Services window invoked from the Control Panel.
-r -remove	Remove the COSserver service.
-d	Turn on debugging. Useful if there is a problem connecting.

There are a couple of other flags mentioned in the help screen which are only useful for testing purposes.

EXAMPLES

COSserver -install

Install the COSserver as a service.

COSserver -remove

Remove the COSserver service.

COSserver -d

Run COSserver interactively, and turn on debug information. Note that the COSserver service must be turned off for this to work.

FILES

$EWC_HOME/db/hostinfo

This file contains the list of hosts that are allowed to execute commands on the local host. Each host is followed by a comunications method that is used from the local host to execute commands on that host.

ENVIRONMENT

APPL_HOME

The base directory of the Enterprise Windows Client. This value is retrieved from the registry via the HomeDir value under the Enterprise Windows Client section of HKEY_LOCAL_MACHINE\SOFTWARE

For example: /cygdrive/C/Program Files/Functional Software/EWC_5.1

APPL_NAME

For the cos command to be run in the correct environment, the variable APPL_NAME must be set. APPL_NAME can be set to either backup or task.

EWC_HOME

The base directory of the Enterprise Windows Client in DOS syntax.

For example: C:\Program Files\Functional Software\EWC_5.1

FULLNAME

The fullname of the user connecting to the Enterprise Windows Client.

For example: COSmanager

LOGNAME

The username of the user connecting to the Enterprise Windows Client.

For example: cosmos

PATH

The location, relative to EWC_HOME of the Enterprise Windows Client executables is prepended to the PATH variable.

For example: /bin:/cygdrive/c/Windows/system32:/cygdrive/c/Windows

USERNAME

The username of the user connecting to the Enterprise Windows Client.

For example: cosmos

DIAGNOSTICS

The following exit values are returned:

1	program or system error
0	successful

SEE ALSO

FSremote(1)

COPYRIGHT

Based on version 1.5 - Last modified 5^th January 2008.

FSntcpio

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

FSregback

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

FSremote

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

FSsysstate

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

busplit

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

cos

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

db_date

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

devio

NAME

devio - handle I/O to devices such as tape drives

SYNOPSIS

devio -i|o [-bcdLmnprs1] [command]

DESCRIPTION

Devio reads data from or writes data to either a disk file or a device such as a tape drive. Devio can be called several times in succession to write to a set of tapes or other media, and handle volume changes as necessary.

Normally devio reads from the device, passing data to standard output (-i option) or writes to the device, obtaining data from standard input (-o option). However, if a command is given as a parameter (which must be quoted to ensure that it is passed as a single parameter), then it is executed, and data is piped to or from that process. Devio will then terminate with the same exit status as this process. This is useful if devio is called from a shell script which needs to know whether the data transfer was successful.

OPTIONS

-i	Devio will read data from the device, passing it to STDOUT or to the standard input of the optional command.
-o	Devio will write data to the device, reading it from STDIN or from the standard output of the optional command.
-d device	I/O will be done to the specified device or file. Typically this would be a Windows tape device name, such as tape0. If this option is omitted, the environment variable `TAPE` should specify the device.
-n name	This specifies a name by which the user knows the device, as specified by the -d option. If this option is specified, then any user messages referring to the device will use the specified name, rather than the Windows device name.
-b blocksize	The blocksize in KB that should be used for I/O to the device. The default is 64KB.
-c capacity	The capacity in KB of each volume. This figure should be the amount of data that can safely be written. Devio will request a change of volume after this amount has been read or written. The default is unlimited capacity, implying that media changes will occur at physical end of volume or on an I/O error.
-m command	A command to run to change the volume in the device. This command should exit with a status of 0 when the drive is ready and loaded with the new volume. It can also optionally write the name of the next device to use on its STDOUT (if it has changed). A non-zero exit status will cause devio to exit with that status. This command can also do things like checking for or writing a label on the new tape.
-s startpos	The amount of data in KB to to skip or that has already been written on the first volume. This tells devio how much data can still fit (if writing) or remains (if reading) on the first volume. On subsequent volumes it is assumed that the full capacity (given by -c) is available. The default is 0, i.e.: starting at the beginning of the volume.
-r amount	The amount of data in KB that devio should read. This is only applicable with the -i option, and is only necessary on devices, such as floppy disks, which have no mechanism for delimiting files or datasets on the one volume. By default devio will read to end of file.
-P volsizes	The amounts of data in KB that devio should read on each volume. If more than one size is given, devio will read the first amount, request a volume change, and continue to read the second amount etc. This is only applicable with the -i option. By default devio will stop at end of file.
-L	Indicates that the data being read or written is a single block tape label. Unless -b is specified, this will be a 512 byte block.
-p	Indicates that all blocks are to be written at the specified blocksize. Normally devio will write a short last block if there is insufficient data to fill the block. This flag will cause such a block to be NULL padded.
-1	Indicates that at least one block should be written to the device, even if there is no input data. This is useful for jobs which write multiple files to one tape, and want to ensure that the relative positions of each file is constant, even if one file is empty. Many tape devices have no means of writing an empty file.
-u	Causes devio to write details of the amounts of data written, the elapsed time & rate to the given file.

EXAMPLES

devio -o -b32 -d tape0 'FSntcpio -f C:/local'

Write a backup of C:/local to tape device tape0 using 32K blocksize.

devio -i -b32 -d tape0 'FSntcpio -r C:/tmp'

Recover the contents of tape device tape0 to C:/tmp. Data is read from tape0 in 32K blocks and passed to FSntcpio.

SEE ALSO

devscan(1), ntcpio(1), FSntcpio(1)

COPYRIGHT

Based on version 4.1 - Last modified 24^th January 2008.

devscan

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

ewc

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

file_excl

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

file_list

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

mt

NAME

mt - magnetic tape control

SYNOPSIS

mt [-f tapename] command [count]

mt -h

DESCRIPTION

Used to control magnetic tape devices. By default mt performs the requested operation once. Multiple operations can be performed by specifying count. If tapename is not specified, the default device tape0 is used.

The following commands are supported:

bsf Space backward count file marks. blocksize Set the blocksize to count bytes (0 = variable). compression Turn compression on (count = 1) or off (count = 0). fsf Space forward count file marks. help Output help message. offline Take the tape offline. rewind Rewind the tape. status Output drive and media status.

OPTIONS

The following options are supported:

-f tapename Specify the name of the device to control. tapename can be specified using either \\.\tape# or tape# notation. -h Display short help message

EXAMPLES

mt rewind

Rewind the media in tape device tape0 to the beginning.

mt -f tape1 compression 0

Turn compression off for tape device tape1.

DIAGNOSTICS

The following exit values are returned:

2 command failure whilst performing the operation 1 invalid usage, invalid device or no media loaded 0 successful

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

ntcpio

NAME

ntcpio - Backup/restore utility for Microsoft Windows

SYNOPSIS

ntcpio -i [-tv] [pattern]

ntcpio -o [-AtTv] [-I file]

DESCRIPTION

The ntcpio command is used to backup files into (-o flag) and restore files from (-i flag) an ntcpio archive. Based on the UNIX cpio command, ntcpio follows the same structure, but has been adapted to support Windows features such as Access Control Lists. The ntcpio format is not compatable with the cpio format.

When restoring files from an archive, only those files matching pattern are selected. If pattern is not specified, all files are restored.

An archive is created by reading a list of files and/or directories from standard input and writing the data from those files along with their associated information to standard output.

The following operands are supported:

pattern Only restore those files matching pattern. The notation used is similar to file patterns in the Unix shell.

OPTIONS

The following options are supported:

-i Recover files from an archive on standard input. -o Backup files listed on standard intput to an archive on standard output. -A Only include files whose Archive bit is set. -I file Write a human-readable index of the archive to the specified file. -t Print table of contents (list the file names) of the archive to standard output. When used with -i, no files are restored. -v Verbose output. When used in conjunction with -t flag, extra file information is output. -T Similar to -t, but print a full index of the archive.

EXAMPLES

file_list | ntcpio -ov > backup.dat

Generate an ntcpio archive of all files in the current directory to the backup.dat file.

ntcpio -ivt < backup.dat

Print out an index of all files contained in the backup.dat ntcpio format archive.

DIAGNOSTICS

The following exit values are returned:

1 invalid usage, program or system error 0 successful

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

regback

NAME

regback - registry backup and restore

SYNOPSIS

regback -b | -p | -r [-Rv] [-d directory]

DESCRIPTION

Used to backup the registry to file and restore the registry from file.

To perform a registry backup, you must have the Backup privilege. When backing up the registry, a file named EBC.DAT is created. This file contains details about the registry keys that were backed up. Only the keys in HKEY_LOCAL_MACHINE and the DEFAULT user in HKEY_USERS are backed up. A separate file is created for each sub-key under HKEY_LOCAL_MACHINE and one for the DEFAULT user in HKEY_USERS.

To perform a registry restore, you must have the Restore privilege. The file EBC.DAT is opened and each of the keys listed in that file are set to be restored. These keys are restored the next time the host is rebooted. Temporary files ending in 999 are created for the restore process. These files can be manually removed once the host has been rebooted.

A profile listing can be generated by using the -p flag. This is the profile location for each user account on the system. This function can be used in conjuction with an archive utility to perform a backup of these directories.

OPTIONS

The following options are supported:

-b Dump registry keys to file. A list of the files created is written to standard output. The files can then be backed up to tape using ntcpio. -p Dump user profiles to file. A list of the files created is written to standard output. The files can then be backed up to tape using ntcpio. -r Recover registry keys from file. -d directory Change to directory prior to backup or restore. -R Reboot the system after performing any other specified actions. -v Verbose output.

EXAMPLES

regback -b -d D:/tmp

Dump keys in HKEY_LOCAL_MACHINE and DEFAULT user in HKEY_USERS to file in the D:/tmp directory.

regback -rR

Recover the registry from file and then reboot the machine. The EBC.DAT file and files for each of the registry keys to be restored must exist in the current directory.

DIAGNOSTICS

The following exit values are returned:

1 invalid usage or program error

0 successful SEE ALSO

FSregback(1)

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

rsh

NAME

rsh - remote shell client

SYNOPSIS

rsh [-bd] [-l username] hostname command

rsh -h

rsh -v

DESCRIPTION

Connects to the specified host and executes the specified command using the rsh protocol. The rsh standard input is passed to the remote command and the remote command's standard output and standard error become that of rsh's.

OPTIONS

The following options are supported:

-b Turn off binary output mode. -d Display debugging messages. Useful for diagnosing problems. -h Display help screen. -l username Specify the username under which the remote command is to be executed. -v Display version information.

EXAMPLES

rsh decoy "ls -l"

Run ls -l on host decoy.

rsh -l cosmos aunty pwd

Run pwd on host aunty. An entry for the local username is required in the cosmos .rhosts file.

DIAGNOSTICS The following exit values are returned: 2 invalid usage 1 program error 0 successful

SEE ALSO

FSremote(1), rshd(1)

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

rshd

NAME

rshd - remote shell daemon

'SYNOPSIS

rshd -install

rshd -remove

rshd [-d] [-n | -s shell]

rshd -h

rshd -v

DESCRIPTION

The Remote Shell Daemon provides remote execution facilities. It is used to execute commands requested by remote shell clients.

Clients connect to the daemon and request the execution of a command on behalf of a user. If the user has the necesary authority, the remote shell daemon will execute the command and return the standard output and standard error of the command to the client. Any standard input sent from the client is passed to the command.

OPTIONS

The following options are supported:

-install Install rshd as a service. Once installed, it can be controlled using the net command, or using the Services window invoked from the Control Panel. -remove Remove the rshd service. -d Turn on debugging. Useful if there is a problem connecting. -h Display help screen. -n Use the default Windows shell (usually cmd.exe) to execute commands. The default is to use bash.exe. -s shell Use shell to execute commands. The shell extension must be specified eg. sh.exe. The default is to use bash.exe. -v Display version information. There are a couple of other flags mentioned in the help screen which are only useful for testing purposes.

EXAMPLES

rshd -install

Install the remote shell daemon as a service.

rshd -remove

Remove the remote shell daemon service.

rshd -d -s sh.exe

Start the remote shell daemon using sh.exe instead of bash.exe to execute commands, and turn on debug information.

FILES

$WINDIR/rhosts

This file contains the list of users and hosts that are allowed to execute commands on the local host. Each line in the file contains the hostname, a space or tab and then the username. This specifies that username can execute commands from hostname.

DIAGNOSTICS

The following exit values are returned:

1 program or system error 0 successful

SEE ALSO

FSremote(1), rsh(1)

COPYRIGHT

Based on version 1.15 - Last modified 5^th January 2008.

service

NAME

service - control services

SYNOPSIS

service info

service start [-vy] [-w secs] service

service start [-vy] [-w secs] -f file

service stop [-vy] [-w secs] service

service stop [-vy] [-w secs] -f file

DESCRIPTION

Used to control services. Includes displaying information on currently running services, starting services and stopping services.

The services to be controlled can be either listed in a file or a single service can be supplied on the command line.

The following commands are supported:

info	Output a list of currently running services.
start	Start the specified service.
stop	Stop the specified service.

OPTIONS

-f file	Perform the specified action on all services listed in the file. The services are listed one per line, and you may include comment lines starting with #. The file should be saved in the db directory under the EWC directory (eg: in `C:\Program Files\Functional Software\EWC_5.1\db`).
-w secs	Wait the specified number of seconds after starting or stopping the service(s). This option may be used to delay subsequent processing if a service takes some time to start or stop.
-v	Verbose output.
-y	Respond with yes to service control queries. The default is to respond no.

EXAMPLES

service start rshd

Start the rshd service.

service stop -w 90 -f services

Stop all services listed in the services file. Then wait 90 seconds to allow the listed services time to completely shutdown.

ENVIRONMENT

WINDIR

The location of the Windows directory. Used to locate the net command (that is, $WINDIR/system32/net).

eg. C:\Windows

DIAGNOSTICS

The following exit values are returned:

2	command failure whilst performing the operation
1	invalid usage
0	successful

COPYRIGHT

Based on version 1.9 - Last modified 5^th January 2008.

tapelabel

NAME

tapelabel - read and write electronic tape labels

SYNOPSIS

tapelabel -r device

tapelabel -w device [device] number

DESCRIPTION

Used to read and write electronic tape labels.

When writing a tape label, the tape is first rewound using mt. Then a heading, the date and the tape number is written to the tape using devio. The tape is left positioned after the tape label.

To read a tape label, the tape is first rewound using mt. Then devio is used to read the first block of the tape. If the data is read correctly and the tape label is valid, the tape number will be written to standard output. The tape is then rewound.

Tape labels are written as a single 512 byte block.

OPTIONS

-r	Read the tape label. The tape number from the label is written to standard output.
-w	Write a new label to the start of the tape with the specified tape number.

OPERANDS

device	The name of the tape device. eg. `tape0`.
number	The number to label the tape with (-w only).

EXAMPLES

tapelabel -r tape0

Write out the label of the tape loaded in drive tape0.

tapelabel -w tape1 tape1 100

Label the tape in drive tape1 as number 100.

DIAGNOSTICS

The following exit values are returned:

1	invalid usage. I/O, program or system error.
0	successful

NOTES

The optional second device operand is used only for compatibility with the UNIX version of tapelabel. It is not required on Windows.

Some older versions of tapelabel wrote a 1 KB label instead of 512 bytes. This version will read the old label, but always writes new 512 byte labels.

SEE ALSO

devio(1), mt(1)

COPYRIGHT

Based on version 2.3.1.9 - Last modified 24^th January 2008.

Retrieved from "https://documentation.fs.com.au/index.php/Backup3G/EWC/Man_Pages"

Search

Backup3G/EWC/Man Pages

From Documentation

Contents

COSserver

FSntcpio

FSregback

FSremote

FSsysstate

busplit

cos

db_date

devio

devscan

ewc

file_excl

file_list

mt

ntcpio

regback

rsh

rshd

service

tapelabel