Backup3G/EWC/User Guide/Installing and Configuring the EBC Module

From Documentation

This guide explains how to install and deinstall the EWC Module for backup3G 3.0 and backup3G 3.2.1.

To install the EWC Module for backup3G you will need:

• distribution disk, tape or file containing the EWC Module
• COSmanager 3.2.1 (or newer) and backup3G must already be installed and licensed on each target host
• you must be a COSmanager user with the Manager or Config role

Installing the EBC Module

The installation procedure copies the EBC files to a target directory you specify, then adds the module to the COSmanager application table. See Installing COSmanager Applications in the COSmanager User Guide for full details of how to install COSmanager add-on modules.

Which hosts should EBC be installed on?

The EBC Module must be installed on the backup3G master host, and each drive host that you wish to backup Windows data to. To Install the EBC Module

• Copy the cpio archive to a directory on the local host.
• Launch COSmanager, then select Config from the COSmanager button bar.
• From the Product configuration menu, select COSmanager configuration > COSmanager applications.
• Select Application > Install. Fill in these fields:

Type

Where are you installing the EBC files from?

;tape: an EBC distribution tape
;directory: a directory structure
;file: a cpio archive containing the distribution

Host name

If you are installing from tape, choose the name of the host the

tape drive is attached to. If you are installing from a cpio archive, choose the name of the local host. Install from If you are installing from tape, enter the no-rewind device name for the drive the tape is loaded in. The device name must begin with /dev. Installing and Configuring the EWC Module 9 If you are installing from a directory structure, enter the name of the top-level directory. If you are installing from a cpio archive, (for example, if you used dd and ftp to copy the distribution file from a tape drive on a remote host), enter the full path to the file name. 5. Press Accept. If you are installing from tape, COSmanager asks you to confirm when the tape is loaded, then rewinds to the beginning of the tape to read the table of contents. COSmanager displays a list of all the applications and modules in the distribution. Choose the row titled ‘EBC’ Figure 3 — Choose the EBC module to install 6. EBC must be installed under an existing copy of backup3G. If more than one version of backup3G is installed you must choose which version to use. 7. Enter the name of the directory where you want EBC to be installed and press Accept. Figure 4 — Enter the directory to install to 10 Installing and Configuring the EWC Module The install procedure now: • adds an entry for EBC to the COSmanager applications table • copies the EBC files from the tape to the target directory Figure 5 — Installation progress messages—example Note You may see ERROR or WARNING messages during the installation. These are due to local backup3G versions of certain files. The installation script creates new versions of certain backup3G files. If local versions of these files exist, (in the local backup3G directory structure) they will be used as templates for the new files instead of the original files. As it is impossible to ascertain the modifications made to these local versions, the new files created may not be correct. The new files are created in the Enterprise Backup Client Module directory. Contact the Functional Support Line for further assistance. Once the Enterprise Backup Client module is installed, you will need to restart backup3G to pick up changes made by the installation. This completes the installation of the EBC Module. The next step is to configure the EBC settings for this host. Installing and Configuring the EWC Module 11 Configuring the EBC Module To configure EBC for backup3G you need to: • define Windows host(s) • define Windows tape drive(s) Define Windows host(s) 1. From the option COSmanager configuration > Hosts select the host to define. See Specifying Host Details in the COSmanager User Guide for full details on how to add hosts. 2. Define the Admin Type as either Remote or Slave. 3. Define the Communications Method as “rsh” - Remote shell for COSmanager 3.0 and later. 4. Set the Host Type to “x86 - Windows”. Once this is chosen the OS Version field defaults to “Windows/NT 4”. Change to another version if required. 5. Press Accept. Note You must set the OS Version field to “Windows/NT ...” or some components of the EWC Module will not work! 12 Installing and Configuring the EWC Module Figure 6 — ‘Define OS version for EBC Once all the Windows NT hosts have been defined, select Remote > Allow access. This will give those hosts defined as Remote, access to this host for backup purposes. Define Windows tape drive(s) To add a new drive, you must first determine the name of the tape device. If your drive is not yet attached to your host, see your operating system manual for information on attaching and configuring tape devices. To determine the name of the tape device go to the Control Panel on the Windows host and choose Tape Devices. Select the device you want to know the name of and press the Properties button. The name of the device is displayed against the Device Map field. Installing and Configuring the EWC Module 13 To add the drive 1. Select backup3G configuration > Maintain drives and stackers. 2. Select Maintain > Add. Physical drive name Enter a name for the drive that is physically attached to the computer. Logical name Enter a logical drive name. If there is only one logical drive for this physical drive, use the same name for both. Figure 7 — Windows Tape Drive Definition Media type Press Choose to list the valid media types. Select a media type to 14 Installing and Configuring the EWC Module associate with this logical drive. (To add a new media type, see the backup3G User Guide). Drivehost Choose the name of the host machine to which this drive is physically attached. Device Leave this field blank. Device (no rewind) Enter the name of the device as specified against the Device Map field in the properties dialog for the device on the Windows host. Examples: tape0, tape1, tape2. Description Enter a description. Example: “2GB DAT drive on windows” Operations class Select “mt_tape” - Generic tape operations via MT(1) command. Operator msg This is an optional message that can be used to prompt the operator to perform some action before the drive is loaded. Example: “switch drive tape-2 from Host A to Host B”. Buffer size (KB) Not supported by EWC. Leave this field blank. Loading Location The location from where media are loaded into this drive. When a backup job requests new media for this drive, backup3G selects a scratch volume from this location. For a manually-loaded drive this is usually your main media library. To add a media library, see the backup3G User Guide. Loading class The class of loader operations, or the command class used to load and unload the drive. For manually-loaded drives select the default Installing and Configuring the EWC Module 15 option, ‘Manual loading and unloading’, or if automatic unloading is supported, select ‘manual-mt’. EWC options will be available to backup3G the next time you restart backup3G. 16 Installing and Configuring the EWC Module Deinstalling the EWC Module 1. From the COSmanager configuration menu, select COSmanager applications. 2. Select EBC. 3. Select Application > Deinstall. 4. Press Accept to remove the software from disk and to remove its entry in the application table. Press Exit to leave the application as is.